BA 8000 External Bullet Proof Vest

• External vest coverage is the largest in this type of body armor
  
• Lightest vest for the amount of armor coverage
• Gold Flex Ballistic fiber by Honeywell, ( stronger than Kevlar )
• External BA 8000 is manufactured under 9001:2008 international standards
  
• Level 3-A Baliistic protection
• Internal Pockets for hard armor plates
• Comfortable, easily adjustable design
• New Smooth Outer appearance
• Manufactured by Marom Dolphin, Ltd.

Questions to ask Yourself:

1) Does your bullet resistant vest offer you the protection you need and want?

 2) Is your vest comfortable to wear, or is it uncomfortable, showing signs of wear and just doesn't fit right anymore.

3) Do you fear that sweat, heat and time have taken a toll on your vests ability to still offer the same protection as when it was new?

 
At Bullet Proof Shop, our Level III-A vest are the highest protection you can buy in a soft body armor. This also helps in reducing blunt force trauma when hit with higher caliber rounds.

In high threat situations you want as much protection available to protect yourself. Having a good vest can save you or your clients life and allow you the ability to return fire in a fire fight.

These are top quality vest for great prices. Comfortable, Easily adjustable w/ 6 separate velcro adjustment straps that will allow you to properly adjust your vest so it is comfortable.

These vest are combat proven, N.I.J. ( National Institute of Justice) certified Lightweight, Durable and very protective. The BA 8000 is an excellent choice for a exterior vest that will offer you years of protection and service.

The BA 8000 comes with many add on components for additional safety.

 Price and Size -  Figures are for vest only

M-L-XL  -  $459.00 

XX-L      -  $509.00

XXX-L   -   $629.00

XXXX-L -   $649.00

Ballistic Protection  Level III-A

9mm FMJ RN,  .22LR,  .25ACP,  .32ACP,  .38ACP,  .40SIW FMJ,  .45ACP

12 Ga. Shotgun /00 Buck,  .357 Magnum SIG FMJ FN,  .44 Magnum SJHP

The BA8000 is a Tactical Body Armor Vest for police and civil uses. Vest is designed and manufactured for best protection of the wearer while keeping it comfortable for wearing while in duty or during everyday activities.

Design

• The vest is assembled of front and back parts made possible to split. Flexible system of fixing by shoulder bands and waist flaps with Hook & loop fasteners.

• Vest has 2 inner pockets, one on front and one on rear side of vest for additional ballistic panels of size 250 x 300 mm. for upgrading protection level of the vest.

• The design of vest makes possible to remove ballistic protection panels (soft and hard) out of vest for cleaning of vest.

• The cover of the vest and the soft ballistic panels are visibly marked by a label containing the below listed details:

- Name and address of manufacturer

- Model of ballistic vest

- Class of protection level according to NIJ 2005 interim requirements (0101.04 STD.)

- Size

- Lot number

- Serial number

- Date of manufacturing

- Care instructions

• Shoulder fitting straps are 70 mm. wide, padded with at least 5 mm. of EVA foam for comfort of the wearer.

• Side fitting closures are wide (200 mm.) for full grasping between front and back panels.

• Surface material of vest carrier- 600 dn. Polyester or 500 dn. Nylon coated with water repellent material. Different materials may be used upon request.

• Available colors- Black, Green, Navy Blue. Camouflage colors are available upon request.

• Weight of vest including soft ballistic panels: Approx. 2.5 kg depending on the size of the vest.

Soft ballistic panels

• Ballistic material – (GOLDFLEX) Unidirectional Aramid or Unidirectional High Density Polyethylene.

• Protection level of full vest is IIIA according to NIJ 2005 interim requirements.

• Ballistic protection area including front & back protection is approx. 0.3 sqm.

• The ballistic protection panels are covered with a nylon cover for protecting the ballistic panels from water, dirt and direct sun.

Warranty, Specific Requests

• Ballistic protection properties are kept for 5 years when used according to manufacturer's warranty.

• Vest carrier warranty is affective for 12 months after delivery against manufacturing defects which might be found by the user.

Available add-ons:

Hard ballistic plates (all plates are single curved):

PLD3

• Ballistic material: HDPE.

• Protection level is III according to NIJ 2005 interim requirements.

• Size: 300x250 mm ± 5.

• Thickness: 20mm ± 2.

• Weight: 3 lbs. 4.91 oz. ( 1.5kg. )
  

PLC3

• Ballistic material: Ceramic plate.

• Protection level is III according to NIJ 2005 interim requirements.

• Size: 300x250 mm ± 5.

• Weight: 5lbs.-8.18 oz. ( 2.5kg. )

PLC4

• Ballistic material: Ceramic plate.

• Protection level is IV according to NIJ 2005 interim requirements.

• Size: 300x250 mm ± 5.

• Weight: 6 lbs. 9.82 oz. ( 3.0 kg. )

PLT

• Trauma plate- for reduction of trauma caused by bullet impact.

• Material- EVA Foam coated with two plies of polycarbonate

• Weight- ±150 gr.

• Size- 150 X 200 mm

BG6611

Carry bag for vest.

Production and Finishing

• Hook & loop bands have smooth margins for sewing, each end of H&L band is heat cut.

• Each stitch starts and ends with an overlap of 15 mm.

• Stitch density is 24-30 stitches in 10 cm.

• Fabric endings are folded inside and sewed threw all layers of fabric.

People looking at the BA 8000 Considered these concealabl bullet proof armor also.

  Concealable Bullet Proof Armor                                   Concealable Bullet Proof Armor w/Side Protection

              Level III-A Concealable                                                                   Level III-A Executive

                                               Concealable Bullet Proof Armor w/Side Protection 

Back to All Vest Page 

See      External Body Armor 

See      Bullet Proof Vest

See      Home and  BPS Member Sign up for Special Offers and Discounts

Visit Bulletproofshopblog.com  for survival stories, news and product reviews.